중국 원활한 탄소 강철과 합금 기계 튜브 제조 업체 및 공급 업체 | 골드 Sanon
  • 페이지 banner2
  • 페이지 bannner입니다

원활한 탄소강 및 기계적 합금 관

간단한 설명:

Seamless steel tubes, Carbon steel pipe and alloy mechanical tubes ,mainly for mechanical in ASTM A519-2006 Standard,alloy mechanical tubes mainly include

1018,1026,8620,4130,4140 etc.


  • Payment: 30% deposit, 70% L/C or B/L copy or 100% L/C at sight
  • Min.Order Quantity: 1 PC
  • Supply Ability: Annual 20000 Tons Inventory of Steel Pipe
  • Lead Time: 7-14 days if in stock, 30-45 days to produce
  • Packing: Black Vanishing, bevel and cap for every single pipe; OD below 219mm need to pack in bundle, and each bundle no exceed 2 tons.
  • 제품 상세 정보

    자주하는 질문

    제품 태그

    개요

    표준 : ASTM A519-2006

    학년 그룹 : 1018,1026,8620,4130,4140

    두께 : 1~1백mm

    외경 (라운드) : 10-1,000밀리미터

    길이 : 고정 길이 또는 임의의 길이

    섹션 모양 : 라운드

    기원의 장소 : 중국

    증명서 : ISO9001 : 2008

     

    합금 여부 : 합금 또는 탄소

    응용 프로그램 : 기계 관

    표면 처리 : 고객의 요구 사항으로

    기술 : 열간 압연 또는 냉간 압연

    열처리 : 소둔 / 노말 / 스트레스 릴리프

    특수 파이프 : 두꺼운 벽 파이프

    사용법 : 기계

    테스트 : ECT / UT

    신청

    It Is Mainly Used for mechanical and used to make gas cylinders.include carbon and alloy steel seamless mechanical tubing,and covers both seamless hot-finished mechanical tubing and seamless cold-finished mechanical tubing in sizes up to and including 12 3⁄4 in. (323.8 mm) outside diameter for round tubes with wall thicknesses as required.

    홈페이지 등급

    1018,1026,8620,4130,4140

    화학 구성 요소

    저탄소 강의 표 1 화학 요구 사항

    등급 화학 성분 제한, %
    지정 탄소 망간 인, 황,
        최대 최대
    MT X 1015 0.10-0.20 0.60-0.90 0.04 0.05
    MT 1010 0.05-0.15 0.30-0.60 0.04 0.05
    MT 1015 0.10-0.20 0.30-0.60 0.04 0.05
    MT 1020 0.15-0.25 0.30-0.60 0.04 0.05
    MT X 1020 0.15-0.25 0.70-1.00 0.04 0.05

    한계 열 분석에 적용; 6.1에 규정 된 것을 제외하고, 생성물 분석을 표 5에 주어진 적용 추가적인 공차 적용된다.

    기타 탄소강의 표 2 화학 요구 사항

    등급

    화학 성분 제한, %

    지정

    탄소

    망간

    인,

    황,

    최대

    최대

    1008

    0.10 최대

    0.30-0.50

    0.040

    0.050

    1010

    0.08-0.13

    0.30-0.60

    0.040

    0.050

    1012

    0.10-0.15

    0.30-0.60

    0.040

    0.050

    1015

    0.13-0.18

    0.30-0.60

    0.040

    0.050

    1016

    0.13-0.18

    0.60-0.90

    0.040

    0.050

    1017

    0.15-0.20

    0.30-0.60

    0.040

    0.050

    1018

    0.15-0.20

    0.60-0.90

    0.040

    0.050

    1019

    0.15-0.20

    0.70-1.00

    0.040

    0.050

    1020

    0.18-0.23

    0.30-0.60

    0.040

    0.050

    1021

    0.18-0.23

    0.60-0.90

    0.040

    0.050

    1022

    0.18-0.23

    0.70-1.00

    0.040

    0.050

    1025

    0.22-0.28

    0.30-0.60

    0.040

    0.050

    1026

    0.22-0.28

    0.60-0.90

    0.040

    0.050

    1030

    0.28-0.34

    0.60-0.90

    0.040

    0.050

    1035

    0.32-0.38

    0.60-0.90

    0.040

    0.050

    1040

    0.37-0.44

    0.60-0.90

    0.040

    0.050

    1045

    0.43-0.50

    0.60-0.90

    0.040

    0.050

    1050

    0.48-0.55

    0.60-0.90

    0.040

    0.050

    1518

    0.15-0.21

    1.10-1.40

    0.040

    0.050

    1524

    0.19-0.25

    1.35-1.65

    0.040

    0.050

    1541

    0.36-0.44

    1.35-1.65

    0.040

    0.050

    시프트 위치 및 표에 주어진 한계 A는 열 분석에 적용; 에 의해 요구되는 경우를 제외하고 6.1 , 제품 분석은 표 번호 5에 주어진 적용 가능한 추가 toler - ances 될 수 있습니다.

    합금 철강 표 3 화학 요구 사항

    노트

    표 1 - 더 범위와 한계는 강철의 200 이하로 적용된다. 2(1,290cm 2) 단면적이.

    노트

    특정 요소의 2 작은 수량을 지정하거나 필요하지 합금강에 존재한다. 이러한 요소는 부수적으로 간주된다

    다음 최대 양에 존재할 수있다 : 구리, 0.35 %; 니켈, 0.25 %; 크롬, 0.20 %; 몰리브덴, 0.10 %.

    노트

    표 3에 주어진 - 더 범위와 한계는 열 분석에 적용; 에 의해 요구되는 경우를 제외하고 6.1 , 제품 분석은 해당 될 수 있습니다

    표 번호 5에 주어진 추가 허용 오차.

     

    등급, 화학 성분 제한, %
    Designa-
    탄소 망간 인산 기 황, , 규소 니켈 크롬 Molybde-
    RUS, 최대 최대 NUM
    1330 0.28-0.33 1.60-1.90 0.04 0.04 0.15-0.35 ... ... ...
    1335 0.33-0.38 1.60-1.90 0.04 0.04 0.15-0.35 ... ... ...
    1340 0.38-0.43 1.60-1.90 0.04 0.04 0.15-0.35 ... ... ...
    1345 0.43-0.48 1.60-1.90 0.04 0.04 0.15-0.35 ... ... ...
    3140 0.38-0.43 0.70-0.90 0.04 0.04 0.15-0.35 1.10-1.40 0.55-0.75 ...
    E3310 0.08-0.13 0.45-0.60 0.025 0.025 0.15-0.35 3.25-3.75 1.40-1.75 ...
    4012 0.09-0.14 0.75-1.00 0.04 0.04 0.15-0.35 ... ... 0.15-0.25
    4023 0.20-0.25 0.70-0.90 0.04 0.04 0.15-0.35 ... ... 0.20-0.30
    4024 0.20-0.25 0.70-0.90 0.04 0.035-0.050 0.15-0.35 ... ... 0.20-0.30
    4027 0.25-0.30 0.70-0.90 0.04 0.04 0.15-0.35 ... ... 0.20-0.30
    4028 0.25-0.30 0.70-0.90 0.04 0.035-0.050 0.15-0.35 ... ... 0.20-0.30
    4037 0.35-0.40 0.70-0.90 0.04 0.04 0.15-0.35 ... ... 0.20-0.30
    4042 0.40-0.45 0.70-0.90 0.04 0.04 0.15-0.35 ... ... 0.20-0.30
    4047 0.45-0.50 0.70-0.90 0.04 0.04 0.15-0.35 ... ... 0.20-0.30
    4063 0.60-0.67 0.75-1.00 0.04 0.04 0.15-0.35 ... ... 0.20-0.30
    4118 0.18-0.23 0.70-0.90 0.04 0.04 0.15-0.35 ... 0.40-0.60 0.08-0.15
    4130 0.28-0.33 0.40-0.60 0.04 0.04 0.15-0.35 ... 0.80-1.10 0.15-0.25
    4135 0.32-0.39 0.65-0.95 0.04 0.04 0.15-0.35 ... 0.80-1.10 0.15-0.25
    4137 0.35-0.40 0.70-0.90 0.04 0.04 0.15-0.35 ... 0.80-1.10 0.15-0.25
    4140 0.38-0.43 0.75-1.00 0.04 0.04 0.15-0.35 ... 0.80-1.10 0.15-0.25
    4142 0.40-0.45 0.75-1.00 0.04 0.04 0.15-0.35 ... 0.80-1.10 0.15-0.25
    4145 0.43-0.48 0.75-1.00 0.04 0.04 0.15-0.35 ... 0.80-1.10 0.15-0.25
    4147 0.45-0.50 0.75-1.00 0.04 0.04 0.15-0.35 ... 0.80-1.10 0.15-0.25
    4150 0.48-0.53 0.75-1.00 0.04 0.04 0.15-0.35 ... 0.80-1.10 0.15-0.25
    4320 0.17-0.22 0.45-0.65 0.04 0.04 0.15-0.35 1.65-2.00 0.40-0.60 0.20-0.30
    4337 0.35-0.40 0.60-0.80 0.04 0.04 0.15-0.35 1.65-2.00 0.70-0.90 0.20-0.30
    E4337 0.35-0.40 0.65 - 0.85 0.025 0.025 0.15-0.35 1.65-2.00 0.70-0.90 0.20-0.30
    4340 0.38-0.43 0.60-0.80 0.04 0.04 0.15-0.35 1.65-2.00 0.70-0.90 0.20-0.30
    E4340 0.38-0.43 0.65 - 0.85 0.025 0.025 0.15-0.35 1.65-2.00 0.70-0.90 0.20-0.30
    4422 0.20-0.25 0.70-0.90 0.04 0.04 0.15-0.35 ... ... 0.35-0.45
    4427 0.24-0.29 0.70-0.90 0.04 0.04 0.15-0.35 ... ... 0.35-0.45
    4520 0.18-0.23 0.45-0.65 0.04 0.04 0.15-0.35 ... ... 0.45-0.60
    4615 0.13-0.18 0.45-0.65 0.04 0.04 0.15-0.35 1.65-2.00 ... 0.20-0.30
    4617 0.15-0.20 0.45-0.65 0.04 0.04 0.15-0.35 1.65-2.00 ... 0.20-0.30
    4620 0.17-0.22 0.45-0.65 0.04 0.04 0.15-0.35 1.65-2.00 ... 0.20-0.30
    4621 0.18-0.23 0.70-0.90 0.04 0.04 0.15-0.35 1.65-2.00 ... 0.20-0.30
    4718 0.16-0.21 0.70-0.90 0.04 0.04 0.15-0.35 0.90-1.20 0.35-0.55 0.30-0.40
    4720 0.17-0.22 0.50-0.70 0.04 0.04 0.15-0.35 0.90-1.20 0.35-0.55 0.15-0.25
    4815 0.13-0.18 0.40-0.60 0.04 0.04 0.15-0.35 3.25-3.75 ... 0.20-0.30
    4817 0.15-0.20 0.40-0.60 0.04 0.04 0.15-0.35 3.25-3.75 ... 0.20-0.30
    4820 0.18-0.23 0.50-0.70 0.04 0.04 0.15-0.35 3.25-3.75 ... 0.20-0.30
    5015 0.12-0.17 0.30-0.50 0.04 0.04 0.15-0.35 ... 0.30-0.50 ...
    5046 0.43-0.50 0.75-1.00 0.04 0.04 0.15-0.35 ... 0.20-0.35 ...
    5115 0.13-0.18 0.70-0.90 0.04 0.04 0.15-0.35 ... 0.70-0.90 ...
    5120 0.17-0.22 0.70-0.90 0.04 0.04 0.15-0.35 ... 0.70-0.90 ...
    5130 0.28-0.33 0.70-0.90 0.04 0.04 0.15-0.35 ... 0.80-1.10 ...
    5132 0.30-0.35 0.60-0.80 0.04 0.04 0.15-0.35 ... 0.75-1.00 ...
    5135 0.33-0.38 0.60-0.80 0.04 0.04 0.15-0.35 ... 0.80-1.05 ...
    5140 0.38-0.43 0.70-0.90 0.04 0.04 0.15-0.35 ... 0.70-0.90 ...
    5145 0.43-0.48 0.70-0.90 0.04 0.04 0.15-0.35 ... 0.70-0.90 ...
    5147 0.46 ~ 0.51 0.70-0.95 0.04 0.04 0.15-0.35 ... 0.85 ~ 1.15 ...
    5150 0.48-0.53 0.70-0.90 0.04 0.04 0.15-0.35 ... 0.70-0.90 ...
    5155 0.51-0.59 0.70-0.90 0.04 0.04 0.15-0.35 ... 0.70-0.90 ...
    5160 0.56-0.64 0.75-1.00 0.04 0.04 0.15-0.35 ... 0.70-0.90 ...
    52100이자형 0.93-1.05 0.25-0.45 0.025 0.015 0.15-0.35 0.25 최대 1.35-1.60 0.10 최대
    E50100 0.98-1.10 0.25-0.45 0.025 0.025 0.15-0.35 ... 0.40-0.60 ...
    E51100 0.98-1.10 0.25-0.45 0.025 0.025 0.15-0.35 ... 0.90-1.15 ...
    E52100 0.98-1.10 0.25-0.45 0.025 0.025 0.15-0.35 ... 1.30-1.60 ...
    바나듐
    6118 0.16-0.21 0.50-0.70 0.04 0.04 0.15-0.35 ... 0.50-0.70 0.10-0.15
    6120 0.17-0.22 0.70-0.90 0.04 0.04 0.15-0.35 ... 0.70-0.90 0.10 분
    6150 0.48-0.53 0.70-0.90 0.04 0.04 0.15-0.35 ... 0.80-1.10 0.15 분
    알류미늄 몰리브덴
    E7140 0.38-0.43 0.50-0.70 0.025 0.025 0.15-0.40 0.95-1.30 1.40-1.80 0.30-0.40
    니켈
    8115 0.13-0.18 0.70-0.90 0.04 0.04 0.15-0.35 0.20-0.40 0.30-0.50 0.08-0.15
    8615 0.13-0.18 0.70-0.90 0.04 0.04 0.15-0.35 0.40-0.70 0.40-0.60 0.15-0.25
    8617 0.15-0.20 0.70-0.90 0.04 0.04 0.15-0.35 0.40-0.70 0.40-0.60 0.15-0.25
    8620 0.18-0.23 0.70-0.90 0.04 0.04 0.15-0.35 0.40-0.70 0.40-0.60 0.15-0.25
    8622 0.20-0.25 0.70-0.90 0.04 0.04 0.15-0.35 0.40-0.70 0.40-0.60 0.15-0.25
    8625 0.23-0.28 0.70-0.90 0.04 0.04 0.15-0.35 0.40-0.70 0.40-0.60 0.15-0.25
    8627 0.25-0.30 0.70-0.90 0.04 0.04 0.15-0.35 0.40-0.70 0.40-0.60 0.15-0.25
    8630 0.28-0.33 0.70-0.90 0.04 0.04 0.15-0.35 0.40-0.70 0.40-0.60 0.15-0.25
    8637 0.35-0.40 0.75-1.00 0.04 0.04 0.15-0.35 0.40-0.70 0.40-0.60 0.15-0.25
    8640 0.38-0.43 0.75-1.00 0.04 0.04 0.15-0.35 0.40-0.70 0.40-0.60 0.15-0.25
    8642 0.40-0.45 0.75-1.00 0.04 0.04 0.15-0.35 0.40-0.70 0.40-0.60 0.15-0.25
    8645 0.43-0.48 0.75-1.00 0.04 0.04 0.15-0.35 0.40-0.70 0.40-0.60 0.15-0.25
    8650 0.48-0.53 0.75-1.00 0.04 0.04 0.15-0.35 0.40-0.70 0.40-0.60 0.15-0.25
    8655 0.51-0.59 0.75-1.00 0.04 0.04 0.15-0.35 0.40-0.70 0.40-0.60 0.15-0.25
    8660 0.55-0.65 0.75-1.00 0.04 0.04 0.15-0.35 0.40-0.70 0.40-0.60 0.15-0.25
    8720 0.18-0.23 0.70-0.90 0.04 0.04 0.15-0.35 0.40-0.70 0.40-0.60 0.20-0.30
    8735 0.33-0.38 0.75-1.00 0.04 0.04 0.15-0.35 0.40-0.70 0.40-0.60 0.20-0.30
    8740 0.38-0.43 0.75-1.00 0.04 0.04 0.15-0.35 0.40-0.70 0.40-0.60 0.20-0.30
    8742 0.40-0.45 0.75-1.00 0.04 0.04 0.15-0.35 0.40-0.70 0.40-0.60 0.20-0.30
    8822 0.20-0.25 0.75-1.00 0.04 0.04 0.15-0.35 0.40-0.70 0.40-0.60 0.30-0.40
    9255 0.51-0.59 0.60-0.80 0.04 0.04 1.80-2.20 ... 0.60-0.80 ...
    9260 0.56-0.64 0.75-1.00 0.04 0.04 1.80-2.20 ... ... ...
    9262 0.55-0.65 0.75-1.00 0.04 0.04 1.80-2.20 ... 0.25-0.40 ...
    E9310 0.08-0.13 0.45-0.65 0.025 0.025 0.15-0.35 3.00-3.50 1.00-1.40 0.08-0.15
    9840 0.38-0.42 0.70-0.90 0.04 0.04 0.15-0.35 0.85 ~ 1.15 0.70-0.90 0.20-0.30
    9850 0.48-0.53 0.70-0.90 0.04 0.04 0.15-0.35 0.85 ~ 1.15 0.70-0.90 0.20-0.30
    50B40 0.38-0.42 0.75-1.00 0.04 0.04 0.15-0.35 ... 0.40-0.60 ...
    50B44 0.43-0.48 0.75-1.00 0.04 0.04 0.15-0.35 ... 0.40-0.60 ...
    50B46 0.43-0.50 0.75-1.00 0.04 0.04 0.15-0.35 ... 0.20-0.35 ...
    50B50 0.48-0.53 0.74-1.00 0.04 0.04 0.15-0.35 ... 0.40-0.60 ...
    50B60 0.55-0.65 0.75-1.00 0.04 0.04 0.15-0.35 ... 0.40-0.60 ...
    51B60 0.56-0.64 0.75-1.00 0.04 0.04 0.15-0.35 ... 0.70-0.90 ...
    81B45 0.43-0.48 0.75-1.00 0.04 0.04 0.15-0.35 0.20-0.40 0.35-0.55 0.08-0.15
    86B45 0.43-0.48 0.75-1.00 0.04 0.04 0.15-0.35 0.40-0.70 0.40-0.60 0.15-0.25
    94B15 0.13-0.18 0.75-1.00 0.04 0.04 0.15-0.35 0.30-0.60 0.30-0.50 0.08-0.15
    94B17 0.15-0.20 0.75-1.00 0.04 0.04 0.15-0.35 0.30-0.60 0.30-0.50 0.08-0.15
    94B30 0.28-0.33 0.75-1.00 0.04 0.04 0.15-0.35 0.30-0.60 0.30-0.50 0.08-0.15
    94B40 0.38-0.43 0.75-1.00 0.04 0.04 0.15-0.35 0.30-0.60 0.30-0.50 0.08-0.15

    B의 50B40 같은 문자 B와 표에 나타낸 등급은 0.0005 %의 최소 붕소 제어를 기대할 수있다.  Grades shown in this table with prefix letter E generally are manufactured by the basic-electric-furnace process. All others are normally manufactured by the basic-open-hearth process but may be manufactured by the basic-electric-furnace process with adjustments in phosphorus and sulfur.

     

    는 다음과 같이 각 프로세스 인 황 제한은 :

    기본 전기로 0.025 최대 % 산성 전기로 0.050 최대 %

    기본 열린 난로 0.040 최대 % 산성 개방 난로 0.050 최대 %

    D 최소 및 최대 황 함량은 100ppm 이상 300ppm 강을 나타냅니다.

    이자형 구매자는 다음의 최대 양 지정할 수 구리, 0.30 %를; 알루미늄, 0.050 %; 및 산소, 0.0015 %.

     

    기계적 성질

    탄소 및 합금 강철의 일반적인 학년의 일부에 대한 일반적인 인장 특성, 경도 및 열 조건

     

     

    HR-핫 롤레 : CW-냉간 다음은 다양한 조건에 대한 기호의 정의입니다 A-소둔 N-NormalizedA 안심 SR-스트레스 근무

    등급 Condi- 최고의 수익률 연장 로크웰,
    Desig- 힘, 힘, 에서 2인치 또는 경도
    민족 50mm % B 스케일
    KSI MPA는 KSI MPA는
    1020 HR 50 345 32 221 25 55
    CW 70 483 60 414 5 75
    SR 65 448 50 345 10 72
    48 331 28 193 30 50
    55 379 34 234 22 60
    1025 HR 55 379 35 241 25 60
    CW 75 517 65 448 5 80
    SR 70 483 55 379 8 75
    53 365 30 207 25 57
    55 379 36 248 22 60
    1035 HR 65 448 40 276 20 72
    CW 85 586 75 517 5 88
    SR 75 517 65 448 8 80
    60 414 33 228 25 67
    65 448 40 276 20 72
    1045 HR 75 517 45 310 15 80
    CW 90 621 80 552 5 90
    SR 80 552 70 483 8 85
    65 448 35 241 20 72
    75 517 48 331 15 80
    1050 HR 80 552 50 345 10 85
    SR 82 565 70 483 6 86
    68 469 38 262 18 74
    78 538 50 345 12 82
    1118 HR 50 345 35 241 25 55
    CW 75 517 60 414 5 80
    SR 70 483 55 379 8 75
    50 345 30 207 25 55
    55 379 35 241 20 60
    1137 HR 70 483 40 276 20 75
    CW 80 552 65 448 5 85
    SR 75 517 60 414 8 80
    65 448 35 241 22 72
    70 483 43 296 15 75
    4130 HR 90 621 70 483 20 89
    SR 105 724 85 586 10 95
    75 517 55 379 30 81
    90 621 60 414 20 89
    4140 HR 120 855 90 621 15 100
    SR 120 855 100 689 10 100
    80 552 60 414 25 85
    120 855 90 621 20 100

    Tolerance

    Outside Diameter Tolerances for Round Hot-Finished Tubing, ,

     

    Outside Diameter Size Range, Outside Diameter Tolerance, in. (mm)
    in. (mm)

    Over

    Under

    Up to 2.999 (76.17)

    0.020 (0.51)

    0.020 (0.51)

    3.000–4.499 (76.20–114.27)

    0.025 (0.64)

    0.025 (0.64)

    4.500–5.999 (114.30–152.37)

    0.031 (0.79)

    0.031 (0.79)

    6.000–7.499 (152.40–190.47)

    0.037 (0.94)

    0.037 (0.94)

    7.500–8.999 (190.50–228.57)

    0.045 (1.14)

    0.045 (1.14)

    9.000–10.750 (228.60–273.05)

    0.050 (1.27)

    0.050 (1.27)

     

    A Diameter tolerances are not applicable to normalized and tempered or quenched and tempered conditions.

    B The common range of sizes of hot finished tubes is 11⁄2 in. (38.1 mm) to 103⁄4 in. (273.0 mm) outside diameter with wall thickness at least 3 % or more of outside diameter, but not less than 0.095 in. (2.41 mm).

    C Larger sizes are available; consult manufacturer for sizes and tolerances.

     

    Wall Thickness Tolerances for Round Hot-Finished

    Tubing

     

     

    Wall Thickness

    Wall Thickness Tolerance, percent Over

    Range as Percent

    and Under Nominal

    of Outside

    Outside

    Outside

    Outside

    Diameter

    Diameter

    Diameter

    Diameter

    2.999 in.

    3.000 in.

    6.000 in.

    (76.19 mm)

    (76.20 mm)

    (152.40 mm)

    and smaller

    to 5.999 in.

    to 10.750 in.

    (152.37 mm)

    (273.05 mm)

    Under 15

    12.5

    10.0

    10.0

    15 and over

    10.0

    7.5

    10.0

    A Wall thickness tolerances may not be applicable to walls 0.199 in. (5.05 mm) and less; consult manufacturer for wall tolerances on such tube sizes.
    a more important dimension, then cold-worked tubing should be specified to inside diameter and wall thickness or outside diameter and inside diameter.
     Rough-Turned Mechanical Tubing—Variation in outside diameter and wall thickness shall not exceed the tolerance in Table. Table  covers tolerances as applied to outside diameter and wall thickness and applies to the specified size.
     Ground Mechanical Tubing—Variation in outside diam-eter shall not exceed the tolerances in Table. This product is normally produced from a cold-worked tube.
     Lengths—Mechanical tubing is commonly furnished in mill lengths, 5 ft (1.5 m) and over. Definite cut lengths are furnished when specified by the purchaser. Length tolerances are shown in Table .
    Straightness—The straightness tolerances for seamless round tubing shall not exceed the amounts shown in Table.

     

    테스트 요구 사항

    1.Hardness Test
    When hardness limits are required, the manufacturer shall be consulted. Typical hardnesses are listed in Table .When specified, the hardness test shall be performed on 1 % of the tubes.

    2.Tension Tests
    When tensile properties are required, the manufacturer shall be consulted. Typical tensile properties for some of the more common grades and thermal conditions are listed in table.

    3.Nondestructive Tests
    Various types of nondestructive ultrasonic or electromagnetic tests are available. The test to be used and the inspection limits shall be established by manufacturer and purchaser agreement.

    4.Flaring Test
    When there are special requirements for steel cleanliness, the methods of test and limits of acceptance shall be established by manufacturer and purchaser agreement.

    제품 상세 정보


  • 이전 :
  • 다음 :

  • 여기에 메시지를 작성하여 보내주십시오